EE-1 Environmental Enclosure

Environmental Enclosure EE2 The Environmental Enclosure (EE-1) is for dust and water protection in industrial and agricultural environments and in public places. This is a polycarbonate plastic enlosure 125 mm wide, 175 mm high, and 77 mm deep (5 in × 7 in × 3 in) with a clear polycarbonate gasketed front cover. There are screened air inlets on the sides and an exhaust fan on the bottom. An option is an interior enclosure heater.

Everything in the enclosure is powered by 12-18 VDC. Wiring to external equipment is via a semi-sealing side gland with knockouts for extra access if required. The same AC adapter that powers most Eco Sensors equipment powers the EE-1 and the instrument in it. The EE-1 can forward to an alarm panel, such as the Eco Sensors RAP-2, signals such as 0-2 V, and set-point controlled relay contact closure.

Features:

Rugged construction made of tough polycarbonate.
Clear polycarbonate gasketed cover with 4 mounting screws.
Inside mounting board predrilled for Eco Sensors C, EZ, and OS series of instruments.
Relay output option with 5 amp contacts.
4-20 mA output option.
Interior space heater option.
Designed so that any dust or liquid droplets that do enter the enclosure flow around the instument while the gas sample diffuses to the instrument gas inlets.
Bottom mounted exhaust fan to maintain air flow and remove accumulating dust, etc.
Extra top and side knock-outs so that the customer can attach his own additional piping and wiring.
Uses same 12 VDC output AC adapter that is that is supplied with the instrument.
24 VAC or DC power option such as for HVAC and OEM machinery systems.

Product manual PDF file (47kb) (requires Adobe Acrobat ™ reader)

EE-1 Environmental Enclosure

Eco Sensors® is a registered trademark of Eco Sensors Division of KWJ Engineering Inc.