Includes Audio Alarm, Battery operation and Provision for External Alarm and
Data Logger
For paint shops, printers, dry cleaners, woodworkers, vehicle repair
facilities, chemical production areas and wherever indoor air quality
monitoring is required: the Eco Sensors® Model C-21 gas sensor
helps you comply with the new VOC air
quality regulations for hydrocarbon gases and solvent vapors.
Benefits:
Constantly monitors your work environment. Detects leaks and poor air
quality before they are a health hazard. Alarms below
OSHA TLV for most common solvent-based
VOCs.
No installation. Easily used and understood by non-technical
personnel.
Virtually no maintenance.
Features:
Highly sensitive to solvent vapors and other VOCs. Bright
green-yellow-red display clearly shows hazard level of gas or vapor.
Detects down to OSHA,
EPA, and other
regulatory-mandated levels...typically at low ppm concentrations.
Has built-in rechargeable battery for portable use in tracking
leaks.
Rugged construction with many safety features.
Specifications:
Range: Full scale = 50-100 ppm for most solvent based VOCs.
Bargraph display: Green = normal. Yellow = caution.
Red = danger.
Response time: Within a few seconds of the VOC gas reaching the
sensor.
Measurement principle: HMOS (heated metal oxide semiconductor)
sensor.
Size: 85 × 35 × 60 mm (3.25 × 1.375 ×
2.375 in)
Weight: 140 gr (5 oz).
Power requirements: 12 VDC at 300 mA. AC
adapters available worldwide.
Battery: Self-contained NiCad or NiMH. Approximately 2 hour
capacity. Recharged by AC adapter overnight.
