For water treatment plants, pulp bleaching mills, ozone generator
monitors, photocopier and laser printer centers, fumigation projects, HVAC
and indoor air quality systems, vehicular pollution monitors, research labs
and pilot plants, and wherever ozone exposure is possible: the C-30ZX
has a very fast and continuous response. It is rugged and versitile. There
are no touchy controls.
Benefits:
Constantly monitors your work environment; shows the ozone concentration
by a multicolor graphical display, and alarms when there is a health
hazard
No installation typically required; easily understood by non-technical
personnel
Virtually no maintenance
Features:
LED readout changes color as ozone level increases
Audio alarm and output for data logger
Connections for external equipment control
For general monitoring and ozone control
Many accessories available such as data loggers, calibrators,
and protective enclosures with heaters and 4-20 mA outputs
Specifications:
Range: .02-.14ppm of ozone (LED scale); .02-.30 ppm via external
data readout
Bargraph Display: Normally green; yellow
at .05 ppm (caution); red at .1 ppm
(danger)
Response time: Within tenths of seconds of ozone reaching the
sensor
Measurement principle: HMOS (heated metal oxide semiconductor)
sensor
Size: 85 × 35 × 60 mm (3.25 × 1.375 ×
2.375 in)
Weight: 140 gr (5 oz)
Power requirements: 12 VDC at 300 mA. AC
adapters available worldwide.
Outputs: LED bargraph, audio alarm, 0-3 V analog output such as
for data loggers, and external alarm relay contacts; alarm actuation and
relay contact closure at .1 ppm (standard) and is programmable.
