AC Adapters
Almost all Eco Instruments use an AC adapter which converts the line voltage (AC mains) to 12 VDC unregulated at 300-500 mA. The DOM-1 requires a regulator whose output is 12 VDC at 800 mA. The regulator power output plug is 2.5 mm. See Technical Note P-101 below. Eco Sensors only supplies AC adapters for 110-120 V 60 Hz AC mains. Customers in other areas should purchase their AC adapters locally. Our size is readily available and low cost anywhere in the world.
Product Manuals
These manuals are in PDF format (which requires Adobe Acrobat™). Please choose one of the manuals from this list:
- A-21ZX Shirtpocket Size Ozone Sensor (97KB)
- A-22 Multipurpose Ozone Sensor and Analyzer (153KB)
- C-12 VOC Gas Sensor (29KB)
- C-21 VOC Gas Sensor (29KB)
- C-30ZX Ozone Monitor (32KB)
- DL-3 Data Logger (3KB)
- DOM-1 Dissolved Ozone Monitor (249KB)
- EE-1 Environmental Enclosure (47KB)
- EE-2 Environmental Enclosure (59KB)
- EZ-1X EcoZone™ Ozone Monitor (42KB)
- EZ-10W EcoZone™ Dissolved Ozone Meter (99KB)
- OG-2 Ozone Source Calibration Checker (22KB)
- OG-3 Ozone Source Calibration Checker (52KB)
- OS-1X Ozone Switch™ (27KB)
- OS-3 Ozone Switch™ (35KB)
- OS-4 Ozone Switch™ (295KB)
- PAC-44 Alarm and Controller Panel for Multiple Instruments (570KB)
- RAP-2 Remote Alarm Panel (77KB)
- SM-4 Digital Ozone Sensing Module (145KB)
- UV-100 UV Ozone Analyzer (167KB)
TECH NOTES
Each item is available in any of three formats: Microsoft Word™, PDF (which requires Adobe Acrobat™Reader, Click Here to get it.), or OpenDocumentText (which Requires OpenOffice™). Click the appropriate icon next to the document you want to see.
General | ||||
| P-100 | Measuring Ozone in an Occupied Room |
 (90kb) |
 (22kb) |
 (80kb) |
| P-101 | AC Adapter Specifications for Eco Sensors® Instruments |
(24kb) |
(9mokb) |
(262kb) |
Engineering and Design Notes | ||||
| MO-100 | Measuring Generator output |
(21kb) |
(9kb) |
(12kb) |
| MO-101 | Ozone Conversion Factors |
(31kb) |
(19kb) |
(15kb) |
| MO-102 | Ozone Resistance Chart (Ozone Corrosion of Materials) |
(31kb) |
(19kb) |
(15kb) |
Safety | ||||
| OS-100 | Ozone Safety Standards |
(35kb) |
(104kb) |
(17kb) |
| OS-101 | UL Ozone Standard 867 |
(25kb) |
(37kb) |
(15kb) |
| OS-102 | Materials Safety Data Sheet | (NA) |
(138kb) |
(NA) |
| OS-103 | International Chemical Safety Card for Ozone | HTML |
(42kb) |
(NA) |
Product Notes | ||||
| A21ZX-100 | Sensor Replacement in the A-21ZX |
(1362kb) |
(77kb) |
(731kb) |
| C21-100 | Adjusting the C-21 Set Point for Alarm and External Device Control |
(45kb) |
(226kb) |
(509kb) |
| C21-101 | Calibration Procedures for the Model C-21 |
(39kb) |
(27kb) |
(20kb) |
| DL3-100 | Operation Notes for the DL-3 Data Logger |
(31kb) |
(51kb) |
(23kb) |
| EZ10W-100 | Checking the Responsivity and Approximate Calibration of the EZ-10W |
(256kb) |
(121kb) |
(211kb) |
| OEM1-100 | Changing the Power Jumpers on the OEM-1 |
(92kb) |
(82kb) |
(94kb) |
| OG3-100 | Adjusting the OG-3 Calibration with the UV-100 |
(171kb) |
(39kb) |
(160kb) |
| SM4-100 | SM-4-100 Tech Notes |
(1.17Mb) |
(127kb) |
(N/A) |
| USB-100 | USB drivers for the A-22 and UV100 (Drivers you can try for the Microsoft operating systems.) |
(N/A) | (N/A) |
(15.4kb) |
| UV100-100 | Checking the UV-100 Calibration with the OG-3 |
(171kb) |
(39kb) |
(160kb) |
| UV100-101 | Replacing the UV-100 Lamp |
(63kb) |
(53kb) |
(19kb) |
| UV100-102 | UV-100 Hush Kit Installation Procedure |
(448kb) |
(435kb) |
(453kb) |
