For returns, service, and calibration click here
AC Adapters
Almost all Eco Instruments use an AC adapter which converts the line voltage (AC mains) to 12 VDC unregulated at 300-500 mA. The DOM-1 requires a regulator whose output is 12 VDC at 800 mA. The regulator power output plug is 2.5 mm. See Technical Note P-101 below. Eco Sensors only supplies AC adapters for 110-120 V 60 Hz AC mains. Customers in other areas should purchase their AC adapters locally. Our size is readily available and low cost anywhere in the world.
Product Manuals
These manuals are in PDF format (which requires Adobe Acrobat™). Please choose one of the manuals from this list:
- A-21ZX Shirtpocket Size Ozone Sensor (97KB)
- A-22 Multipurpose Ozone Sensor and Analyzer (153KB)
- C-12 VOC Gas Sensor (29KB)
- C-21 VOC Gas Sensor (29KB)
- C-30ZX Ozone Monitor (32KB)
- DL-3 Data Logger (3KB)
- DL-C3 RS-232 Communication Cable Bundle
- DL-SC3 Data Logging Software/Cable Bundle
- DO3 Dissolved Ozone Sensor (1007)
- EE-1 Environmental Enclosure (47KB)
- EE-2 Environmental Enclosure (59KB)
- EZ-1X EcoZone™ Ozone Monitor (42KB)
- EZ-10W EcoZone™ Dissolved Ozone Meter (99KB)
- OEM-1 Ozone Controller (70KB)
- OEM-2 Ozone Controller (469KB)
- OEM-3 Ozone Controller (440KB)
- OG-2 Ozone Source Calibration Checker (22KB)
- OG-3 Ozone Source Calibration Checker (52KB)
- OS-1X Ozone Switch™ (27KB)
- OS-3 Ozone Switch™ (35KB)
- OS-4 Ozone Switch™ (186KB)
- OS-6 Ozone Switch™ (1.07MB)
- RAP-2 Remote Alarm Panel (77KB)
- SAT-1 Signal Alarm Tower (337KB)
- SM-EC Electrochemical Ozone Sensing Module (357KB)
- SM-4 Digital Ozone Sensing Module (145KB)
- SM-6/7 Digital Ozone Sensing Module (307KB)
- SM-X Digital Ozone Sensor Module (272KB)
- UV-100 UV Ozone Analyzer (1090KB)
Tech Notes
General
- P-100 Measuring Ozone in an Occupied Room
- P-101 AC Adapter Specifications for Eco Sensors® Instruments
Engineering and Design Notes
- MO-100 Measuring Generator output
- MO-101 Ozone Conversion Factors
- MO-102 Ozone Resistance Chart (Ozone Corrosion of Materials)
Safety
- OS-100 Ozone Safety Standards
- OS-101 UL Ozone Standard 867
- OS-102 Materials Safety Data Sheet
- OS-103 International Chemical Safety Card for Ozone
Product Notes
- A21ZX-100 Sensor Replacement in the A-21ZX
- C21-100 Adjusting the C-21 Set Point for Alarm and External Device Control
- C21-101 Calibration Procedures for the Model C-21
- DL3-100 Operation Notes for the DL-3 Data Logger
- EZ10W-100 Checking the Responsivity and Approximate Calibration of the EZ-10W
- OEM1-100 Changing the Power Jumpers on the OEM-1
- OG3-100 Adjusting the OG-3 Calibration with the UV-100
- RS-232 Communication Manual
- SM4-100 SM-4-100 Tech Notes
- UV100-100 Checking the UV-100 Calibration with the OG-3
- UV100-101 Replacing the UV-100 Lamp
- UV100-102 UV-100 Hush Kit Installation Procedure